Aquaseal LDX Tile Roof Flashing EPDM #1 – 5-50mm
Looking to buy this product in-store or online?
Frequently Bought Together
Description
Aquaseal LDX Tile Roof Flashing EPDM #1 – Black 5-50mm
Aquaseal LDX is a lead-free tile roof flashing designed specifically for tiled roofs, providing a reliable and long-lasting seal around plumbing vents, flues, electrical conduits and other roof penetrations.
The base is made from recycled polyvinyl butyral (PVB), a tough, flexible material commonly used in automotive glass. Known for its durability and resistance to weathering and UV exposure, Aquaseal LDX provides a more environmentally responsible roof flashing solution without compromising on quality or reliability.
Unlike traditional lead flashings, Aquaseal LDX contains no heavy metals, making it highly resistant to temperature changes, harsh weather conditions and high winds. Further helping to maintain a dependable watertight seal over time.
Backed by a 25-year warranty, the premium EPDM cone is BAL 12.5 rated, and maintains its flexibility over time, helping protect against cracking, splitting and water ingress.
Lighter and easier to transport, Aquaseal LDX offers fast installation and easy shaping to suit a wide range of tiled roof profiles. The highly malleable base contains no sealant, and is ideal for those looking for a greater range of flexibility and moveability. Simply position into place and than seal!
Suitable for residential and commercial tiled roof applications, Aquaseal LDX combines dependable weather resistance, exceptional flexibility and environmentally conscious design in a single roof flashing solution. Backed by a 25-year warranty, it delivers the long-term performance roofing professionals can rely on.
Made in Australia. Designed for long-term performance in demanding Australian and New Zealand conditions.More sizes available. View the full range here: https://www.aquariusdist.com.au/product-category/roof-pipe-flashing/tiled-roof-flashings/ldx/
Colour: Black EPDM Cone/Black base
Pipe range for 25° roof pitch: 5mm-50mm
Pipe range for 45° roof pitch: 5mm to 40mm
Base size: 400mm (W) X 500mm (L)
Lead-Free
Made in Australia
Requires sealant
UV tested to: ASTM D7238
Temperature range: -40°C (-40°F) to 115°C (239°F).
VLDXB5-40
Frequently Asked Questions
Looking for more information?
No, silicone sealant should not be used where the Pipe Flashing seals around the pipe. This can cause water leaks as the silicone can crack over time and allow water ingress. If the pipe has a seam, then a small amount of sealant can be used along the seam up to the lip of the Pipe Flashing. Click on the following link for further details – Aquadapt Installation Overview.pdf
Yes, provided a twin or triple skin flue has been installed. Aquarius Rubber recommends their Silicone polymer Pipe Flashings for high temperature applications. Under no circumstances should any polymer pipe flashing be used on single skin flue discharging from a wood heater.
Yes. Aquarius Rubber has developed two sizes designed to suit square pipes from 25mm to 150mm. (Aquaseal Square Flasher & Versatile Square Flasher)
We recommend a sharp pair of scissors to cut our pipe flashing for the correct pipe size. Ensure there are no accidental nicks in the polymer, as this will continue to split/tear over time.
Tip: Ensure the blades are sharp with no contamination e.g. glue or any accumulated dirt.
The Aqua Tile, Versatile Aluminium, Flexatile & Versatile LDX are all suitable for drinking water catchments. We do not recommend using a flashing that has a lead base.
Yes, after installation. We recommend using 100% acrylic paint.
Aquarius Aquaseal’s have measurements on their flashings to help guide the installer for the correct pipe O.D.
If measurements are not available, use the rule of subtracting 18% off the outside diameter of the pipe. Example, if the pipe is 100mm in OD, subtract 18% of 100mm, this will provide the recommended pipe flashing I.D. of 82mm for a 100mm OD pipe. This will provide a good interference fit between the pipe flashing and pipe.
Yes. Aquarius polymers are formulated to be Ozone and UV resistant.
Many trades people still use the silicone flashing for heater flues.
When the flue type is a twin or triple skin, tests have shown that the Aquarius black EPDM pipe flashing will adequately do the job and should not be affected by the passive flue heat.
Aquarius Rubber provides a 25 year warranty against defects in material on all pipe flashings. We recommed a licenced plumber for all Aquaseal installations. Aquarius Aquaseal Pipe Flashings have been manufactured in Australia for over 40 years and to this day we can find installations of our original products that are are still performing as expected.
EPDM can withstand temperatures between -40 C° to +115 C°.
Silicone can withstand temperatures between -60 C° to +200 C°
Featured Products
The Best Product Range
Fastest Delivery
Extraordinary Customer Service
