Hot
Aqua Tile #3 Tile Roof Flashing – For Square Pipes 40-100mm
Looking to buy this product in-store or online?
Frequently Bought Together
Description
Aqua Tile #3 Tile Roof Flashing – For Square Pipes 40-100mm
Aqua Tile is a purpose-designed roof flashing solution for tiled roofs, providing a reliable, long-lasting seal around plumbing vents, flues, electrical conduits and other roof penetrations. Made in Australia and designed for harsh Australian and New Zealand conditions, Aqua Tile delivers dependable, watertight sealing performance that withstands UV exposure, temperature fluctuations and the effects of weather over time.
This product is designed for square pipes, from 40-100mm.
Featuring a premium EPDM cone with a BAL 12.5 rating and a lead-free, fully adhesive butyl base, Aqua Tile provides a lightweight and safer solution to traditional tile roof flashing products. Manufactured for more than 40 years, the unique EPDM blend has been perfected to prevent cracks and leaks that lead to unwanted repairs and costly rework.
Lighter and easier to transport, Aqua Tile offers fast installation and easy shaping to suit a wide range of tiled roof profiles. The highly malleable butyl base conforms easily to the contours of the roof, allowing installers to achieve accurate positioning and a neat, professional finish with minimal effort. This is key to reducing installation time while ensuring a secure fit across a variety of tiled roofing applications.
Once installed, the high-performance adhesive backing keeps the flashing firmly in place, preventing lifting, cracking and peeling that can occur over time due to exposure to weather and environmental conditions.
Suitable for both residential and commercial tiled roof applications, Aqua Tile helps prevent water ingress around roof penetrations while delivering the durability and sealing performance professionals can rely on.
More options available. View full range here: https://www.aquariusdist.com.au/product-category/roof-pipe-flashing/tiled-roof-flashings/aqua-tile/
Colour: Black EPDM Cone/Grey base
For Square Pipes
Pipe range for 25° roof pitch: 40mm-100mm
Pipe range for 45° roof pitch: 40mm -75mm
Base size: 370mm (W) X 500mm (L)
Full adhesive base
Lead-Free
Made in Australia
UV tested to: ASTM D7238
Temperature range: -40°C (-40°F) to 115°C (239°F)
Frequently Asked Questions
Looking for more information?
No, silicone sealant should not be used where the Pipe Flashing seals around the pipe. This can cause water leaks as the silicone can crack over time and allow water ingress. If the pipe has a seam, then a small amount of sealant can be used along the seam up to the lip of the Pipe Flashing. Click on the following link for further details – Aquadapt Installation Overview.pdf
Yes, provided a twin or triple skin flue has been installed. Aquarius Rubber recommends their Silicone polymer Pipe Flashings for high temperature applications. Under no circumstances should any polymer pipe flashing be used on single skin flue discharging from a wood heater.
Yes. Aquarius Rubber has developed two sizes designed to suit square pipes from 25mm to 150mm. (Aquaseal Square Flasher & Versatile Square Flasher)
We recommend a sharp pair of scissors to cut our pipe flashing for the correct pipe size. Ensure there are no accidental nicks in the polymer, as this will continue to split/tear over time.
Tip: Ensure the blades are sharp with no contamination e.g. glue or any accumulated dirt.
The Aqua Tile, Versatile Aluminium, Flexatile & Versatile LDX are all suitable for drinking water catchments. We do not recommend using a flashing that has a lead base.
Yes, after installation. We recommend using 100% acrylic paint.
Aquarius Aquaseal’s have measurements on their flashings to help guide the installer for the correct pipe O.D.
If measurements are not available, use the rule of subtracting 18% off the outside diameter of the pipe. Example, if the pipe is 100mm in OD, subtract 18% of 100mm, this will provide the recommended pipe flashing I.D. of 82mm for a 100mm OD pipe. This will provide a good interference fit between the pipe flashing and pipe.
Yes. Aquarius polymers are formulated to be Ozone and UV resistant.
Many trades people still use the silicone flashing for heater flues.
When the flue type is a twin or triple skin, tests have shown that the Aquarius black EPDM pipe flashing will adequately do the job and should not be affected by the passive flue heat.
Aquarius Rubber provides a 25 year warranty against defects in material on all pipe flashings. We recommed a licenced plumber for all Aquaseal installations. Aquarius Aquaseal Pipe Flashings have been manufactured in Australia for over 40 years and to this day we can find installations of our original products that are are still performing as expected.
EPDM can withstand temperatures between -40 C° to +115 C°.
Silicone can withstand temperatures between -60 C° to +200 C°
Featured Products
The Best Product Range
Fastest Delivery
Extraordinary Customer Service
