Aluminium Standard Tile Roof Flashing EPDM #3 – 100-165mm
Looking to buy this product in-store or online?
Frequently Bought Together
Description
Aquaseal Aluminium Standard Tile Roof Flashing EPDM #3 – 100-165mm
Proudly made in Australia, the Aquaseal Aluminium Standard Tile Roof Flashing range provides a reliable, lead-free solution for creating long-lasting watertight seals around plumbing vents, flues, electrical conduits and other roof penetrations.
Designed specifically for tiled roofs, the rigid aluminium base naturally directs water away from the pipe penetration while retaining its contoured shape once formed, helping maintain a secure, weather-resistant seal over the life of the installation.
Aluminium offers excellent resistance to UV exposure, extreme temperatures and corrosion, making it well suited to Australia’s harsh climate and coastal environments. Its reflective properties help reduce heat absorption, while its corrosion resistance makes it ideal for installations exposed to salt air and challenging weather conditions.
Lightweight and non-toxic, Aquaseal Aluminium Standard roof flashing is easy to transport, handle and install, providing a practical alternative for a wide range of roofing applications.
Each flashing is fitted with a premium EPDM cone that is ozone and UV resistant, BAL 12.5 rated, and designed to remain flexible over time, helping maintain a dependable seal as the roof naturally expands and contracts.
Backed by a 25-year warranty, Aquaseal Aluminium Standard is suitable for residential and commercial tiled roof applications. Available in a wide range of sizes to suit different pipe diameters, it delivers the quality, reliability and performance trusted by professional roof plumbers, roofing contractors and builders throughout Australia and New Zealand.
Available in additional sizes. View the range: https://www.aquariusdist.com.au/product-category/tiled-roof-flashings/aluminium-standard/
Colour: Black EPDM Cone/Aluminium base
Material: EPDM cone/99.9% pure grade aluminium base
Pipe range for 25° roof pitch: 100mm to 165mm
Pipe range for 45° roof pitch: 100mm to 125mm
Base size: 600 (W) x 450mm (L)
Retrofit capable: No
Max retrofit clips: N/A
Sealant required
Made in Australia
UV tested to: ASTM D7238
Temperature range: -40°C (-40°F) to 115°C (239°F).
Frequently Asked Questions
Looking for more information?
No, silicone sealant should not be used where the Pipe Flashing seals around the pipe. This can cause water leaks as the silicone can crack over time and allow water ingress. If the pipe has a seam, then a small amount of sealant can be used along the seam up to the lip of the Pipe Flashing. Click on the following link for further details – Aquadapt Installation Overview.pdf
Yes, provided a twin or triple skin flue has been installed. Aquarius Rubber recommends their Silicone polymer Pipe Flashings for high temperature applications. Under no circumstances should any polymer pipe flashing be used on single skin flue discharging from a wood heater.
Yes. Aquarius Rubber has developed two sizes designed to suit square pipes from 25mm to 150mm. (Aquaseal Square Flasher & Versatile Square Flasher)
We recommend a sharp pair of scissors to cut our pipe flashing for the correct pipe size. Ensure there are no accidental nicks in the polymer, as this will continue to split/tear over time.
Tip: Ensure the blades are sharp with no contamination e.g. glue or any accumulated dirt.
The Aqua Tile, Versatile Aluminium, Flexatile & Versatile LDX are all suitable for drinking water catchments. We do not recommend using a flashing that has a lead base.
Yes, after installation. We recommend using 100% acrylic paint.
Aquarius Aquaseal’s have measurements on their flashings to help guide the installer for the correct pipe O.D.
If measurements are not available, use the rule of subtracting 18% off the outside diameter of the pipe. Example, if the pipe is 100mm in OD, subtract 18% of 100mm, this will provide the recommended pipe flashing I.D. of 82mm for a 100mm OD pipe. This will provide a good interference fit between the pipe flashing and pipe.
Yes. Aquarius polymers are formulated to be Ozone and UV resistant.
Many trades people still use the silicone flashing for heater flues.
When the flue type is a twin or triple skin, tests have shown that the Aquarius black EPDM pipe flashing will adequately do the job and should not be affected by the passive flue heat.
Aquarius Rubber provides a 25 year warranty against defects in material on all pipe flashings. We recommed a licenced plumber for all Aquaseal installations. Aquarius Aquaseal Pipe Flashings have been manufactured in Australia for over 40 years and to this day we can find installations of our original products that are are still performing as expected.
EPDM can withstand temperatures between -40 C° to +115 C°.
Silicone can withstand temperatures between -60 C° to +200 C°
Featured Products
The Best Product Range
Fastest Delivery
Extraordinary Customer Service
